The effect of alkali metal oxide on the properties of borosilicate fireproof glass: Structure,thermal properties,viscosity, chemical stability

The purpose of the current work was to research the effect of alkali metal oxide on the structure, thermal properties, viscosity and chemical stability in the glass system (R₂O–CaO–B₂O₃–SiO₂) systematically. Because the glass would emulsify when Li₂O was added to the glass batch, this article did not discuss Li₂O. The results showed that when the amount of Na₂O was less than 4 mol.%, there was a higher interconnectivity of borate and silicate sub-networks in glass, as more mixed Si–O–B bonds were present in glass. The glass samples exhibited excellent thermal properties and chemical stabilities. As the amount of Na₂O exceeded 4 mol.%, the interconnectivity of borate and silicate sub-networks was weakened. The thermal properties and chemical stabilities of the glass samples were reduced. The connectivity of the silicate sub-network was weakened slightly as the Na/K ratio varied, and the coefficient of thermal expansion (CTE) of the glass samples gradually increased, and the resistance to thermal shock (RTS) value gradually decreased. Moreover, the viscosity of the glass samples decreased with the ratio of Na/Si and Na/K increased.     

Reversible formation-melting of nano-crystals in supercooled oxyfluoride germanate liquids

The nanocrystals play a critical role in generating and affecting functionalities of glass materials. Therefore, scientists have made considerable efforts in clarifying microscopic mechanisms of nanocrystal formation in glass to obtain the desired type of nanocrystals. However, the phase transitions of nanocrystals during heating have not been well understood. Here we report on a discovery of the reversible melting-formation of nanocrystals in an oxyfluoride germanate glass during heating-cooling circles. Using a differential scanning calorimetry (DSC), we detected a striking endothermic event at 925 K during heating, after the glass underwent a DSC upscan to a temperature between 925–986 K and subsequent cooling. Based on Raman spectroscopy, X-ray diffraction and transmission electron microscopy, the endotherm is attributed to the melting of nano-crystal BaGeF₆ (˜20 nm). An exothermal response was observed at 890 K during the DSC downscan, implying the re-formation of BaGeF₆ nano-crystals. This suggests that the melting-formation of BaGeF₆ nano-crystals is a typical first-order transition.     

结合中国专利申请浅析泡沫玻璃中发泡剂的应用及发展

分析了近年来,与泡沫玻璃发泡剂相关的中国专利申请,探讨了泡沫玻璃中发泡剂的应用及发展。     

牛磺酸对运动能力影响的研究进展

牛磺酸是一种含硫条件性必需氨基酸,是人和动物机体内不可缺少的一种生理活性物质。牛磺酸对于机体的运动能力有着重要的影响,本文在介绍牛磺酸的代谢过程及生理作用的基础上,对目前国内外关于补充牛磺酸与提高人体的运动能力的关系、牛磺酸的安全性及副作用等方面研究情况做一综述。牛磺酸已开发成颇具潜力的抗运动性疲劳的营养补充剂,同时在医药、卫生、保健等领域里也具有广泛商业价值和社会价值。     

典型废玻璃回收厂区空气颗粒物及噪声分布特征研究

以某典型废玻璃回收厂区作为研究对象, 监测和分析了车间及厂区内部的噪声强度、空气颗粒物(PM_2.5、PM₁₀) 浓度等环境指标, 点位布设涵盖了车间入口、人工分拣、物料筛分、破碎、干法清洗等关键工艺环节; 其次, 解析了空气颗粒物的组分及形貌特征, 并对其在厂区及车间内部的时空分布特征进行了研究; 此外, 利用噪声控制模型模拟并分析了隔声罩对噪声的控制作用。结果表明, 生产车间中工作态的空气颗粒物浓度显著高于非工作态, 其中干法清洗区浓度最高, 其PM_2.5 浓度为3.725 mg/m³, PM₁₀浓度为4.055 mg/m³; 噪声监测结果显示生产车间内噪声强度较高, 达到99.5 dB, 而引入隔声罩后噪声强度可降至67 dB, 结果表明, 隔声罩可有效控制频率为125~1 000 Hz 的噪声。该研究可为废玻璃的绿色、高效回收处置提供理论基础和实践经验。     

Study on the blackening phenomenon of leaded glass during microgroove molding using nickel phosphorous mold

Precision glass molding (PGM) is a recently developed method to fabricate glass microgroove components. Lead glass is commonly used as an optical material due to its high refractive index and low transition temperature. A nickel-phosphorous (Ni–P) plated mold is traditionally employed in the PGM process for microstructures optics. However, leaded glass is subject to color change and can blacken during the PGM process, reducing the light transmittance of microgrooves. In this paper, an equation for the redox reaction between Ni and Pb is proposed, which is based on the diffusion of inner Ni atoms to the surface of the mold and the standard electrode potential of the Pb ions in leaded glass. A viscoelastic constitutive model of the glass is established to simulate the compression stress distribution during molding. Finally, the effects of molding pressure, molding temperature, and mold material on glass blackening are studied. The results show that the blackening of leaded glass is caused by Pb enriching the surface. The rise in molding stress and temperature increases the deformation of Ni–P plating, which promotes the diffusion of Ni atoms. By adding a titanium incorporated diamond-like carbon (Ti-DLC) coating, the deformation of the Ni–P plating during molding is suppressed, and the diffusion of Ni atoms can be prevented. In this way, the blackening of leaded glass can be prevented.     

Evolution of the structure and chemical composition of the interface between multi-component silicate glasses and yttria-stabilized zirconia after 40,000 h exposure in air at 800 °C

The chemical and structural stability of two commercial multicomponent silicate glasses (SCN and G6) in contact with yttria-stabilized zirconia (YSZ) was investigated after exposure times of up to 40,000 h in air at 800 °C. With exposure time, interfacial layers develop at the SCN-YSZ and G6-YSZ interfaces, which were characterized in detail using both quantitative chemical analysis and atomic-resolution imaging. At the SCN-YSZ interface, a Ca-Ba-Si-O reaction phase was found to grow by diffusion control. In G6-YSZ, Raman spectroscopy and electron microscopy revealed a disorganized interfacial reaction later between G6 and YSZ, and the occurrence of cubic to tetragonal to monoclinic phase transformations in YSZ. This microstructural evolution is discussed in terms of devitrification resistance of glass and diffusion processes at interfaces.     

Bioceramic coatings on metallic implants: An overview

Metallic implants sometimes fail in orthopedic surgeries due to insufficient bio-functionality, implant-associated infections, poor osteointegration due to high inertness (Ti, Co–Cr, stainless steel alloys), and a too fast degradation rate (Mg-based alloys). Bioceramic coatings are among the most appropriate solutions for overcoming these drawbacks. After providing a picture of the history as well as the pros and cons of the different types of metallic implants, this review focuses on bioceramic coatings that can be applied on them, including metal oxides, calcium phosphates, silicates, glasses, glass-ceramics, carbon, etc. Various coating strategies and applications are described and discussed, with emphasis on a selected number of highly promising researches. The major trends and future directions in the development of bioceramic coatings are finally suggested.     

Structure and crystallization behavior of complex mold flux glasses in the system CaO-Na2O-Li2O-CaF2-B2O3-SiO2: A multi-nuclear NMR spectroscopic study

The structure of mold flux glasses in the system CaO-(Na,Li)₂O-SiO₂-CaF₂ with unusually high modifier contents, stabilized by the addition of ∼4 mol% B₂O₃, is studied using ⁷Li, ²³Na, ¹⁹F, ¹¹B, and ²⁹Si magic-angle-spinning (MAS), and ⁷Li{¹⁹F} and ²³Na{¹⁹F} rotational echo double-resonance (REDOR) nuclear magnetic resonance (NMR) spectroscopy. When taken together, the spectroscopic results indicate that the structure of these glasses consists primarily of dimeric [Si₂O₇]⁻⁶ units that are linked to the (Ca,Na,Li)-O coordination polyhedra, and are interspersed with chains of corner-shared BO₃ units. The F atoms in the structure are exclusively bonded to Ca atoms, forming Ca(O,F)_n coordination polyhedra. This structural scenario is shown to be consistent with the crystallization of cuspidine (3CaO·2SiO₂·CaF₂) from the parent melts on slow supercooling. The progressive addition of Li to a Na-containing base composition results in a corresponding increase in the undercooling required for the nucleation of cuspidine in the melt, which is attributed to the frustrated local structure caused by the mixing of alkali ions.     

Melanin-Like Nanomedicine in Photothermal Therapy Applications

Photothermal therapy (PTT) mediated by nanomaterial has become an attractive tumor treatment method due to its obvious advantages. Among various nanomaterials, melanin-like nanoparticles with nature biocompatibility and photothermal conversion properties have attracted more and more attention. Melanin is a natural biological macromolecule widely distributed in the body and displays many fascinating physicochemical properties such as excellent biocompatibility and prominent photothermal conversion ability. Due to the similar properties, Melanin-like nanoparticles have been extensively studied and become promising candidates for clinical application. In this review, we give a comprehensive introduction to the recent advancements of melanin-like nanoparticles in the field of photothermal therapy in the past decade. In this review, the synthesis pathway, internal mechanism and basic physical and chemical properties of melanin-like nanomaterials are systematically classified and evaluated. It also summarizes the application of melanin-like nanoparticles in bioimaging and tumor photothermal therapy (PTT)in detail and discussed the challenges they faced in clinical translation rationally. Overall, melanin-like nanoparticles still have significant room for development in the field of biomedicine and are expected to applied in clinical PTT in the future.